Epson Ensemble HD, Руководство по установке

Страница: 32 / 71

32
Position the Ceiling Mount
This section explains how to determine where the ceiling mount will be installed. Follow these steps to mark
and drill holes for attaching the mount.
1
Determine how far back you want to place the projector from the screen. The center of the ceiling mount
should be located about 10 to 19 feet (3 to 5.8 m) from the wall on which the screen is mounted (or from
the back of the screen, if it’s hung from the ceiling). Plan to place the mount as far back as possible, but no
closer than 15 inches (38 cm) from the rear wall. (If you place it closer to the wall, you won’t be able to
rotate the projector as needed to mount it.)
Caution
Because cable-routing circumstances vary, you may not be able to place the projector as far as 19 feet (5.8 m) from
the screen. Make sure your total cabling distance from the connectors inside the screen to the ports in back of the
projector does not exceed 23 feet (7 m). Otherwise, the cables won’t reach the required distance. Factors that
increase the required cabling distance include: routing the cables in a manner other than a straight path; installing
the cables inside the wall or ceiling; using the projector extension arm; mounting the projector off to one side instead
of centering it with the screen; and hanging the screen lower on the wall. If you vary the installation in any of these
ways, you may not be able to place the projector 19 feet (5.8 m) from the screen.
Do not place the projector closer than 10 feet (3 m) to the screen, or the image won’t be able to fill the whole
screen. The minimum distance from lens to screen is 9.8 feet for the PowerLite Home Cinema 1080, and 10.4 feet for
the PowerLite Home Cinema 720.
About 10 to 19 feet
Projector and
speakers
At least 15 inches
from rear wall
Overhead view
Sc
re
en
Wa
ll
Wa
ll