Epson Ensemble HD 8100 - Home Cinema System Скачать руководство пользователя страница 52

Страница: 52 / 80

Maintenance

Replacing the Lamp

The projection lamp lasts for up to 4000 hours. You can use the

Info

menu to check how

long it’s been in use (see page 55). It’s time to replace the lamp when:

■

The projected image gets darker or starts to deteriorate.

■

The projector’s lamp light flashes red at half-second
intervals.

■

The message

Replace the lamp

appears on the screen

when you start projecting.

Note:

Lamp life results will vary depending on mode selected,

environmental conditions, and usage.

Turn off this product when not in use to prolong the life of the projector.

You can purchase lamp part number V13H010L49 (ELPLP49) from an authorized Epson
reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To
purchase online, visit

www.epsonstore.com

(U.S. sales) or

www.epson.ca

(Canadian sales).

Be sure to read the “Important Safety Information” on page 71 before replacing the lamp.

Warning:

Let the lamp cool fully (about 1 hour) before replacing it. In the unlikely event that the

lamp has broken, small glass fragments may be present and should be removed carefully to avoid
injury.

Caution:

Never touch the glass portion of the lamp with your bare hands; the invisible residue left

by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.

Follow these steps to replace the lamp:

1. If the projector is on, press the

power button and wait for the light to stop flashing.

2. Turn off the power switch on the back of the projector.

3. Unplug the power cord and any cables.

4. Wait about an hour to make sure the lamp is no longer hot.

Lamp
light

Содержание Ensemble HD 8100 - Home Cinema System

















































































Результаты поиска

Содержание Ensemble HD 8100 - Home Cinema System

Отзывы:

Похожие инструкции для Ensemble HD 8100 - Home Cinema System

Бренды по названию

Популярные бренды

Epson Ensemble HD 8100 - Home Cinema System, Руководство пользователя

Результаты поиска

Содержание Ensemble HD 8100 - Home Cinema System

Отзывы:

Похожие инструкции для Ensemble HD 8100 - Home Cinema System

Бренды по названию

Популярные бренды