Epson EMP-TW100, Руководство пользователя

Страница: 14 / 68

Adjusting the Screen Image
12
When setting up the projector, you can project a test pattern onto the screen and use this test pattern to adjust
the projected images before a video source has been connected. The following two types of test pattern are
available.
••••
Crosshatch
••••
Grayscale pattern
The test pattern changes as shown below each time the [Pattern] button on either the remote control or the
projector's control panel is pressed.
Crosshatch
→
Grayscale pattern
→
No pattern
Displaying a Test Pattern
The full environment setting menu cannot be displayed while a test pattern is being projected. If
you need to change a setting, use the line menu or the [Keystone] buttons on the projector's
control panel.
This can be used to adjust the focus and correct keystone distortion.
This can be used to adjust dark and light shades to the desired shade.
The adjustment can be carried out using the "Color Temp " or "RGB"
setting in the "Color Adjustment" item of the projector's "Video" menu.