Epson EMP-8150 - XGA LCD Projector, Руководство администратора

Страница: 30 / 135

Setting Up the Projector
29
Connecting S-Video
If your video source has an S-Video jack, you can use it to project a
higher quality video image. However, you’ll need an S-Video cable,
which may be included with your video source, or can be purchased
separately.
Before starting, make sure the projector and your video source are
turned off.
1. For S-Video, insert one end of an S-Video cable into the
projector’s
S-Video
connector. Insert the other end into the
S-video port of your video source.
2. To use the projector’s built-in speaker system, connect the RCA
audio cable to the
S-Audio/Audio2
ports of the projector (insert
the white plug into the
L
port and the red plug into the
R
port).
Connect the plugs at the other end of the cable to the audio
output ports of the video source.
3. If you’re planning to use S-video for the picture-in-picture video
source, be sure to set the
P in P
menu option as described on
page 78.
S-Video
connector
S-Video cable