Epson EMP-7700 - XGA LCD Projector, Руководство пользователя

Страница: 58 / 116

52
Fine-tuning the Projector
4. Use the arrow buttons (control panel) or the
Enter
button
(remote control) to set the following options:
■ Keystone
Adjusts a distorted image from a trapezoid shape to
rectangular.
■ P in P
Changes from a composite (standard) video source to an
S-Video source for the picture-in-picture display.
■ No-Signal Msg
Selects the screen color and message to display when the
projector is not receiving a signal. The logo setting displays an
image that you have transferred to the projector. See page 49
for instructions on transferring an image to use as the
no-signal message.
■ Prompt
Turns off the identifying text that appears briefly when you
switch from computer input to a video source.
■ A/V Mute
Selects the screen color or image to display when you press
the
A/V Mute
button. The logo setting displays an image that
you have transferred to the projector. See page 49 for
instructions on transferring an image to use for the A/V Mute
display.
■ BNC
Specifies the format for input to the BNC connectors. If the
source is a computer, select
RGB. If
the source is a video
device, select
YCrCb.
■
Sleep mode
Disables the power management system. Normally, the lamp
turns off when the projector has not received any input
signals for 30 minutes.
5. When you’re finished, press
Esc
.
7700.book Page 52 Wednesday, November 1, 2000 6:15 PM