List of Functions
62
f
Mail Menu
When this is set, if the projector enters an abnormal/warning state, you are notified by e-mail.
Sub Menu
Function
Mail Notification
You can set whether to be notified by mail (On) or not (Off).
SMTP server
You can input the IP address
g
for the SMTP server for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Port Number
You can input the port number for the SMTP server. The initial value is 25. You can input numbers between 1 to 65535.
Email Address 1/
Email Address 2/
Email Address 3
You can input the e-mail address of the destination to send the notification mail to. You can register up to three destinations. You can enter up to 32
single-byte alphanumeric characters for the mail addresses.
Setting a
Notification Event
You can select the abnormalities or warnings to be notified about by mail. When the selected abnormality or warning occurs in the projector, a mail
is sent to the specified "Destination address" notifying that an abnormality or warning has occurred. You can select multiple items from the
displayed items.
Содержание EMP-1815
Страница 1: ...1 User s Guide ...
