Epson ELP-505, Руководство пользователя

Страница: 66 / 141

Presenting Without a Computer
57
Two types of icons appear on the screen:
■
EasyMP creates a folder for each scenario on the card.
■
Scenarios always have the .SIT file name extension.
3. Use the
Enter
button on the remote control to highlight your
scenario file (SCN002.SIT, for example).
4. Press
Enter.
In a moment, your scenario begins. Each slide will
display for 30 seconds (unless you have set slides to advance on
mouse click).
You can press
Enter
to display the next slide immediately, or press
Esc
to display the previous slide.
5. To exit the scenario at any point, press the
EasyMP
button on the
remote control. You see a confirmation message.
6. Press
Enter
to exit. In a moment, you return to the EasyMP main
screen.
Displaying Each Slide Manually
Even if your scenario is set to change slides automatically, you can still
change slides manually.
1. Press the
EasyMP
button on the remote control to display the
EasyMP main screen.
2. Use the
Enter
button on the remote control to highlight the
folder icon for your scenario.
3. Press the
Esc
button on the remote control to highlight the
Execute
icon.
4. Press
Enter
to display the first slide in your scenario.
5. Continue pressing
Enter
to display each slide in sequence.
Press
Esc
to display the previous slide.
6. To exit the scenario at any point, press the
EasyMP
button on the
remote control. You see a confirmation message.
7. Press
Enter
to exit. In a moment, you return to the EasyMP main
screen.
note
You can modify your scenario
using EMP SlideMaker on
your computer. However, you
can also make certain types of
changes using EasyMP
without a computer.