Epson EL 486UC+, Руководство пользователя

Страница: 40 / 135

The System Summary Option
When you select the System Summary option from the Main
Menu, the SETUP program displays a summary of the
configuration settings for your system.
This is the same screen you see during system startup. You can
choose not to have the system display this screen so system
startup is faster. See page 2-8 for information on disabling this
option.
Exiting SETUP
When you leave SETUP, you can save your settings, or exit
SETUP without saving your settings. You can also return all
values to the factory defaults.
To leave SETUP, press
E
SC
from any SETUP screen. From the
Main Menu, you can do the following:
Load ROM
Default Values
Loads the factory default settings
stored in ROM back into CMOS.
If you change your system
configuration and then have
problems, you can load the ROM
values to boot the system and
start over.
Load Values
from CMOS
Loads the current values stored in
CMOS for all SETUP options. This
ignores any changes you have
made using SETUP.
Save Values
Saves the changes you have made
to CMOS to your configuration to CMOS.
Press
E
SC
to leave SETUP and restart your computer.
2-12 Running the SETUP Program