Epson EH-TW7300, Руководство пользователя

Страница: 64 / 134

Useful Functions
63
Using the HDMI Link Function
HDMI Link Function
When an AV device that meets the HDMI CEC standards is connected to the projector's HDMI port, you can
perform linked operations such as linked power on and volume adjustment for the AV system from one
remote control. Also, when projecting images in WirelessHD, you can use the HDMI link function (EH-
TW9300W/EH-TW8300W only).
c
•
As long as the AV device meets the HDMI CEC standards, you can use the HDMI link function even if
the AV system in-between does not meet the HDMI CEC standards.
•
Up to 3 multi-media players that meet the HDMI CEC standards can be connected at the same time.
Connection Example
Projector Amplifier Multi-media players and so on
HDMI Link Settings
When HDMI Link is set to On , you can perform the following
operations.
s
Settings - HDMI Link - HDMI Link p.80
•
Input Change Link
Changes the input source of the projector to HDMI when
content is played back on the connected device.
•
Connected Devices Operations
Using the projector's remote control, you can perform op-
erations such as Play, Stop, Fast Forward, Rewind, Next
Chapter, Previous Chapter, Pause, Volume Adjustment, and
Audio Mute.
You can also select the following functions from the HDMI
Link screen.
Function Explanation
Audio Out Device
*
Selects which device outputs audio.
WiHD Transmitter (Optical) : Select this to output audio from the device connected
to the Optical Audio-Out port on the WirelessHD Transmitter. Also select this when
outputting audio from an AV amplifier that supports the HDMI CEC standards.
WiHD Transmitter (HDMI) : Select this to output audio from the device connected to
the HDMI Out port on the WirelessHD Transmitter.
Power On Link When Power On Link is set, operations are linked as shown below.
•
When the projector is turned on, the connected devices are also turned on.
•
Also, when the connected devices are turned on and content is played back, the projector
turns on. However, the projector does not turn on when connected to the WirelessHD
Transmitter even when the connected device is turned on.