Epson EH-TW7200, Руководство пользователя, Страница: 20 / 110

Preparing
19
Connecting a Device
Attention
•
Make cable connections before connecting to a power outlet.
•
Check the shape of the cable's connector and the shape of the port, and then connect. If you force a connector
of a different shape into the port, it could cause damage and a malfunction to occur.
EH-TW9200W/EH-TW8200W comes with an interface cover allowing you to clearly see the connector section
on the rear. Remove the interface cover before connecting any cables.
s
p.21
Connecting Video Equipment
To project images from DVD players or VHS video and so on, connect to the projector using one of the
following methods.
When using an HDMI cable
Fix the HDMI cable in place using the HDMI cable clamp. (EH-TW9200W/EH-TW9200/EH-TW8200W/EH-TW8200
only)
s
p.22
When using a video cable
When using a component video cable
c
•
The cable differs depending on the output signal from the connected video equipment.
•
Some types of video equipment are capable of outputting different types of signals. Check the user's
guide supplied with the video equipment to confirm which signals can be output.
•
Since this projector has no built-in speaker, connect your AV system to enjoy the audio from connected
equipment.