Basic Operations
31
Adjusting the Volume
You can adjust the volume by using the volume buttons on the remote control or on the control panel.
Remote control
Control panel
c
•
You can also adjust the volume from the Configuration menu.
s
Settings
-
Volume
•
When an AV System is connected to the projector and you want to adjust the volume for the AV system,
set
HDMI Link
to
On
and
Audio Out Device
to
AV System
.
s
Settings
-
HDMI Link
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so
that you can power on and then gradually increase the volume.
Hiding the Image and Muting the Audio Temporarily (A/V Mute)
You can temporarily stop projection and mute any sound by pressing the A/V Mute button on the remote
control or by closing the lens cover. To turn the image and sound back on, press the button again or open
the lens cover.
Remote control
Main unit
c
•
For movies, the image and audio continue to play even during A/V Mute. You cannot resume projection
from the point that you muted the video and audio using the A/V mute button.
•
When outputting audio from an AV system and you want to adjust the volume for the AV system, set
HDMI Link
to
On
and
Audio Out Device
to
AV System
.
s
Settings
-
HDMI Link
