Configuration Menu
49
Extended menu
Function
Menu/Settings
Explanation
Display
Messages
On, Off
Sets whether or not to display the following mes-
sages (On or Off).
•
Item names for image signals, color modes, and
aspect ratios.
•
If the internal temperature is rising when no im-
age signal is being input or an unsupported sig-
nal is detected.
Display Back-
ground
Black, Blue, Logo
Selects the screen status when no image signal
is being input.
Startup
Screen
On, Off
Sets whether or not to show a startup screen
when projection begins (On or Off). If changed,
this setting is enabled after you power off the
projector and the cool-down process is com-
plete.
Projection
Front, Front/Ceiling, Rear, Rear/Ceiling
Changes this setting depending on how the pro-
jector is installed.
Operation
Direct Power
On
On, Off
Sets up the projector so that projection starts as
soon as the power cord is plugged in without any
button operations.
Note that when this is set to
On
, projection starts
if power is restored after a blackout or other
power outage and the power cord is still plugged
into the projector.
Sleep Mode
On, Off
If the set time is exceeded and no signal is input,
the projector is automatically turned off and en-
ters standby mode. When in standby mode,
press the standby button on the remote control
or the control panel to start projection.
Sleep Mode
Timer
1 to 30 mins.
Sets the interval for
Sleep Mode
.
Illumination
On, Off
Set this to
Off
if the light from the indicators on
the control panel bother you when watching a
movie in a dark room.
High Altitude
Mode
On, Off
Set this to
On
if you are using the projector above
an altitude of 1500 meters.
Language
-
Selects the display language.
Reset
Yes, No
Resets all
Extended
settings except for
Projec‐
tion
,
High Altitude Mode
, and
Language
.
