Basic Operations
27
c
It becomes more difficult to focus the higher the tilt angle is. Use a moderate tilt angle.
Adjusting the Projector's Tilt
If the projected image is horizontally tilted (the left and right sides of the projected image are at different
heights) when the projector is setup on a table, adjust the rear feet so that both sides are level with each other.
Adjusting the Position of the Image (Lens Shift)(EH-TW5825 Only)
If the projector cannot be installed directly in front of the screen, you can adjust the position of the image by
using lens shift.
Turn the lens shift dial on the projector to adjust the position of the image.
c
•
When using lens shift to adjust the position of the image, adjust the image by moving it upward.
•
When adjusting the projection position using the lens shift, you are recommended to install the
projector in parallel with the screen.