Appendix
111
Warning
•
If an error occurs in the projector, turn off the power immediately, unplug the projector from the outlet, and
contact your local dealer or the nearest Epson repair center. Continuing to use it in an error condition may
result in an electric shock, fire, or visual impairment.
•
Never attempt to disassemble or modify the projector. The projector contains a high-power laser component.
This could cause serious injury.
•
Do not look into the lens during projection. This could cause visual impairment.
•
When turning on the projector at a distance using the remote control, make sure there is no one looking into
the lens.
•
Do not allow small children to make operations. If children do make operations, they must be accompanied
by an adult.
•
Do not apply optical devices to the projected image. Continuing to use it in this condition may result in
physical harm. It could also cause a fire or an accident.
•
Before starting projection, check that there is nothing in the surrounding area that could reflect the projected
image.
•
When disposing of the projector, do not disassemble it. Dispose in accordance with your local or national
laws and regulations.
Attention
If the high-power laser beams through the surface of the projection, it could damage the LCD display.
The emission impediment (EHVs)
*1
for this device is 1.4, and the impediment distance (HD)
*2
is 30 cm.
*1 The emission impediment strength (EHVs) is a value determined by the international standard IEC/
TR62471-2. Indicates the degree of risk when exposed to the light source for 0.25 seconds at a distance of 20
cm. The higher the values, the higher the risk.
*2 The impediment distance (HD) is a value determined by the international standard IEC/TR62471-2. If you
look into the light source at a distance closer than this, your eyesight could be damaged.
Laser optical path
When using the Lens Shift function, the laser light from the projection lens is diffused within the following
range.
The laser beam is projected at the following angles.
