Epson EcoTank ET-15000 Series Скачать руководство пользователя страница 315

Страница: 315 / 355

315

• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if

necessary.

• The ink levels may be low and you may need to refill the ink. Visually check the ink levels.

• If you printed when the ink levels were too low to be seen in the ink tank windows, refill the ink tanks to

the upper lines and run the Power Cleaning utility. Then run a nozzle check to see if print quality has
improved.

• After you print, the colors in your printout need time to set as the ink dries. During this time, the colors

may look different than you expect. To speed up drying time, do not stack your printouts on top of each
other.

• Your printed colors can never exactly match your on-screen colors. However, you can use a color

management system to get as close as possible. Try using the color management options in your
printer software.

• Try turning off the

PhotoEnhance

setting in Windows.

• For best results, use genuine Epson paper.

• If you have not used the product for a long time, run the Power Cleaning utility.

Note:

Power Cleaning consumes a lot of ink, so run this utility only if you cannot improve print quality

by cleaning the print head.

Parent topic:

Solving Print Quality Problems

Solving Scanning Problems

Check these solutions if you have problems scanning with your product.

Note:

For solutions when using the Epson ScanSmart software, see the Epson ScanSmart help utility.

Scanning Software Does Not Operate Correctly
Cannot Start Epson Scan 2
Scanning Speed is Slow
Cannot Save a Scan to a Shared Folder Over a Network

Parent topic:

Solving Problems

Содержание EcoTank ET-15000 Series




































































































































































































































































































































































Результаты поиска

Содержание EcoTank ET-15000 Series

Отзывы:

Похожие инструкции для EcoTank ET-15000 Series

Бренды по названию

Популярные бренды

Epson EcoTank ET-15000 Series, Руководство пользователя

Результаты поиска

Содержание EcoTank ET-15000 Series

Отзывы:

Похожие инструкции для EcoTank ET-15000 Series

Бренды по названию

Популярные бренды