151
Product Does Not Turn on
If your product does not turn on, try these solutions:
• Hold down the
power button for a few seconds.
• Make sure the power cord is securely plugged in.
• Make sure the battery is charged.
Parent topic:
Solving Power and Battery Problems
Related concepts
Related references
Product Does Not Turn Off
If your product does not turn off, do the following:
1. Disconnect the AC adapter and the USB cable.
2. Hold down the
power button and the
cancel button at the same time for more than 7 seconds,
then release both buttons. The product turns off.
3. To prevent the print head from drying out, turn your product back on and turn it off again by pressing
the
power button.
Parent topic:
Solving Power and Battery Problems
Product Turns Off Automatically
If your product turns off automatically, try these solutions:
• The LCD screen turns off when the product goes into sleep mode. Press any button to turn the screen
on.
• The product's Power Off Timer turns it off when it is not in use. Press the
power button to turn your
product back on.
• If the product was running on the battery, you may have to connect the AC adapter to charge the
battery. Press the
power button to turn the product back on.
Parent topic:
Solving Power and Battery Problems
Related concepts
Содержание EC-C110
