Epson EB-Z10000U, Руководство пользователя

Страница: 63 / 233

Curved Surface
Manually correct distortion that occurs when projecting on a curved
surface, and adjust the amount of expansion and contraction.
Project from the front with the horizontal lens shift in the center.
s
"Adjusting the Position of the Projected Image (Lens shift)" p.35
a
•
Project onto an arc surface with the same radius.
•
If a large amount of adjustment is performed, the focus may not be
uniform even after making adjustments.
Correction method
a
Press the [Menu] button while projecting.
b
Select Geometric Correction from Settings .
c
Select Curved Surface , and then press the [ ] button.
When the message "If this setting is changed, the image may be
distorted." is displayed, press the [
] button.
d
Select Correct Shape , and then press the [ ] button.
e
Press the [ ][ ][ ][ ] buttons to select the area you want to
adjust, and then press the [ ] button.
When selecting a corner, you can adjust the two sides next to the
corner.
a
If the [Esc] button is pressed for approximately two seconds,
the confirm default reset screen is displayed.
Select
Yes
to reset the result of Curved Surface.
Adjusting Projected Images
63