Epson EB-Z10000, Руководство по установке, Страница: 31 / 84

Once this setting has been made, the projector that can be operated by the
remote control is limited.
a
The remote control ID setting is saved in the remote control. Even if
the remote control batteries are removed to replace them and so on,
the stored ID setting is retained. However, if the batteries are left out
for a long time, it is reset to the default value (ID0).
Setting the Time
You can set the time for the projector. The set time is used for scheduling
and for wireless LAN authentication.
Press the [Menu] button > Extended > Time/Schedule Settings > Date &
Time
a
•
When you turn on the projector for the first time, the message "Do
you want to set the time?" is displayed. When you select
Yes , the
following screen displayed.
•
Adjust the focus if messages are blurred.
s
p.23
Submenu Name Function
Date
Set today's date.
Time
Set the current time.
Time Difference (UTC)
Set the time difference from Coordinated Universal
Time. (Japan: +9:00)
Change DST Settings
Displays the screen to set the daylight saving time.
Internet Time
Set to On to update the time automatically through an
Internet time server.
Internet Time Server
Input the IP address for an Internet time server.
Daylight Saving Time screen
Submenu Name Function
Daylight Saving Time Set whether or not ( On / Off ) to activate the daylight
saving time. DST Adjustment (min) adjusts the time
difference between the standard time and the daylight
saving time.
DST Start Set the date and time to start the daylight saving time.
DST End
Set the date and time to end the daylight saving time.
Setting Up
31