Epson EB-L30000U, Руководство пользователя

Страница: 97 / 283

a
Select Screen Matching from Multi-Projection , and then press
the [ ] button.
b
Select Start Auto Adjustment , and then press the [ ] button.
When a message is displayed, select Yes . The adjustment pattern is
displayed, and adjustment starts. If the projected image is displayed
before the adjusting, the procedure is complete.
a

See the following if an error occurs.
s
"Automatic adjustments are not performed correctly" p.206

To return to the status before auto adjustment, select Undo . When
you select Redo after selecting Undo , it returns the image to the
status after auto adjustment.

If the amount of blend width or lens shift is too large, blend curve
may not be corrected properly. Adjust the
Blend Curve manually.
s
"Edge Blending" p.91

To return Screen Matching to its default value, select Reset .
Color Matching
You can fine tune the color balance and brightness from black to white for
each color tone.
When the projectors are not connected to a network, or if you want to
adjust manually after the automatic adjustments, perform the following
steps on all projectors.
a
We recommend that you reset the following settings on the Image
menu to display the adjustment screen at the appropriate brightness
and color.

Brightness

Contrast

Color Saturation

Tint

White Balance (Color Temp., G-M Correction, Offset R, Offset G,
Offset B, Gain R, Gain G, Gain B)

Gamma

RGBCMY
a
Select Screen Matching from Multi-Projection , and then press
the [ ] button.
b
Select Color Matching , and then press the [ ] button.
Multi-Projection Function
97