![Epson EB-L30000U Скачать руководство пользователя страница 239](http://html.mh-extra.com/html/epson/eb-l30000u/eb-l30000u_user-manual_110352239.webp)
No-signal (No Signal)
No Signal is input to the projector. Check the connection status or check
that the power for the signal source is turned on.
Lens shift error (Lens shift error)
No lens (No lens)
Pump Error (Pump Error)
Shutter Warning (Shutter Warning)
Shutter Error (Shutter Error)
Power Err. (Voltage) (Supply Voltage Error)
See the following to deal with problems or warnings.
s
Management Using SNMP
By setting
SNMP
to
On
in the Configuration menu, notification messages
are sent to the specified computer when a problem or warning occurs. This
allows you to check for problems with projectors even at locations away
from the projectors.
s
Network
-
Notifications
-
SNMP
a
SNMP should be managed by a network administrator or someone
who is familiar with the network.
To use the SNMP function to monitor the projector, you need to
install the SNMP manager program on your computer.
The SNMP Agent for this projector complies with version 1
(SNMPv1).
The managing function using SNMP cannot be used over wireless
LAN in Quick connection mode.
Up to two destination IP addresses can be saved.
ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
Command list
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
The main contents are listed below.
Item
Command
Power ON/OFF
On
PWR ON
Off
PWR OFF
Signal selection
Computer
Auto
SOURCE 1F
RGB
SOURCE 11
Component
SOURCE 14
BNC
Auto
SOURCE BF
RGB
SOURCE B1
Component
SOURCE B4
HDMI
SOURCE 30
LAN
SOURCE 53
SDI
SOURCE 60
DVI-D
SOURCE A0
HDBaseT
SOURCE 80
Monitoring and Controlling
239
Содержание EB-L30000U
