![Epson EB-L30000U Скачать руководство пользователя страница 144](http://html.mh-extra.com/html/epson/eb-l30000u/eb-l30000u_user-manual_110352144.webp)
Submenu
Function
Blanking
*2
You can hide images in the set area. Use the [
][
]
buttons to adjust the area. You can adjust by using a
combination of
Top
,
Bottom
,
Left
, and
Right
. You can hide
up to half of the projected image in each direction (except
for one pixel).
Color Space
*1*3
(Displayed when the current source is HDMI, DVI-D,
HDBaseT, or SDI)
Sets the color space conversion method. When
Auto
is
selected, the conversion method is set automatically. Select
BT.709
or
BT.2020
if necessary.
Dynamic
Range
*1*3
(Displayed when the current source is HDMI, DVI-D,
HDBaseT, or SDI)
Make settings for the dynamic range.
Dynamic Range
: Range is selected automatically when
receiving HDR (High Dynamic Range) signals. You can set
this when the HDR information is not recorded correctly in
the video signal. When
Auto
is selected, one of SDR,
HDR10, or HLG is selected.
Signal Status
: Displays the selected range.
HDR10 Setting
: (This can only be set if
Signal Status
is
HDR10
) Set the PQ curve for the HDR PQ (Perceptual
Quantizer) signal.
HLG Setting
: (This can only be set if
Signal Status
is
HLG
)
Set the HLG curve for the HDR HLG (Hybrid Log Gamma)
signal.
Submenu
Function
Advanced
*1
You can set by choosing the following items.
Video Range
: Select the video range for the input signal
from the HDMI port, DVI-D port, HDBaseT port, or
3G/HD/SD SDI port. If the brightness range is 16 to 235,
select
Limited (16-235)
, if it is 0 to 255, select
Full
(0-255)
.
Input Signal
: Select an input signal from the Computer port
or BNC port. If set to
Auto
, the input signal is set
automatically according to the connected equipment. If
colors do not appear correctly when set to
Auto
, select the
appropriate signal according to the connected equipment.
BNC Sync Termination
: Set the end process for signals
from the BNC in port. This should usually be set to
Off
. Set
to
On
when analog (75Ω) termination such as for switchers
is necessary.
EDID
: (Displayed when the current source is HDMI, DVI-
D, or HDBaseT) Make settings related to EDID. Even in
setups with multiple displays with different resolutions, you
can switch the EDID of the current source and unify the
EDID across the displays by setting the same EDID as the
standard display.
Preset EDID
: Select the optimal setting from the presets
prepared in advance. Change the preset settings for
Resolution
,
Refresh Rate
, and
Color Depth
if necessary.
Select
Set
, and then press the [
] button.
Resolution
: Select from the resolutions displayed.
Refresh Rate
: Select from the refresh rates displayed.
Color Depth
: Select the maximum color depth limit
supported by the projector. When you select
12bit
, the
projected images support signals up to 12 bits.
Reset
: You can reset all adjustment values for
EDID
to
their default values.
DDC Buffer
: (Displayed when the current source is HDMI
or DVI-D) Setting this to
On
can sometimes improve
images that are not displayed correctly from devices
connected using an HDMI or DVI extension cable.
List of Functions
144
Содержание EB-L30000U
