Epson EB-L30000U, Руководство пользователя

Страница: 111 / 283

You can schedule turning the projector power on/off and switching the
input source, as events in the schedule. Registered events are executed
automatically at the specified time on the specified dates or weekly.
You can register up to 30 events in
Schedule , and one event in Extended
Schedule .
Saving an Event
Setting an Event
a
Press the [Menu] button while projecting.
s
"Configuration Menu Operations" p.137
b
Select Schedule Settings from Extended .
c
Select Add New from Schedule or Extended Schedule .
d
Set the schedule.
Submenu Name Function
Event Settings
Select an operation of the projector when the event
is executed. Select
No Change for items that you do
not want to change when the event occurs.
You can set the following item operations.
Schedule

Power

Source

Light Source Mode

Shutter

Light Source Calibration

Refresh Mode
Extended Schedule

Color Calibration

Screen Matching
Date / Time Settings
Set the date, day of the week, and time to execute
the event. You can set up to four weeks later. Use
the soft keyboard to enter the date and time.
s
"Soft keyboard operations" p.153
e
Select Save , and then press the [ ] button.
To register additional events, repeat steps 3 to 5.
a
Make sure you perform Screen Matching after executing Light
Source Calibration.
f
When you have set Light Source Calibration or Screen Matching
events and you want to apply this schedule to other projectors
with tiling settings, set
Sync Schedule to On .
g
Select Setup complete , and then select Yes to finish saving.
Scheduling Function
111