Projector Network Settings - Network Menu
185
Setting
Options
Description
IP Address Display On
Off
Set to
On
to display the IP address on the
network information screen and Home
screen.
Network Menu - Mail Notification Menu
Settings on the
Mail Notification
menu let you receive an email notification if
a problem or warning occurs in the projector.
Setting
Options
Description
Mail Notification
On
Off
Set to
On
to send an email to the preset
addresses when a problem or warning
occurs with a projector.
SMTP Server
Various IP
addresses
Enter the IP address for the projector's
SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x,
192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255).
Authentication
Open
Auth
SSL
TLS
Select the authentication type of the
SMTP server.
Port Number
1 to 65535 (default
is 25)
Enter a number for the SMTP server Port
Number.
User Name
Up to 64
alphanumeric
characters
Enter a user name for the SMTP server.
Password
Up to 64
alphanumeric
characters
Enter a password for authentication on
the SMTP server.
Setting
Options
Description
From
Up to 64
alphanumeric
characters
(do not use " ( ) , : ;
< > [ \] spaces)
Enter the email address of the sender.
Address 1 Setting
Address 2 Setting
Address 3 Setting
Enter the e-mail address, and select the
alerts you want to receive.
Network Menu - Projector Control Menu
Settings on the
Projector Control
menu let you select settings for controlling
the projector over a network.
Setting
Options
Description
PJLink
On
Off
Set to
On
to enable the PJLink
notification function.
PJLink Password
Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)
Enter a password for using the PJLink
protocol for projector control.
Notified IP Address Various IP
addresses
Enter the IP address to receive the
projector's operating status when the
PJLink notification function is enabled.
Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
SNMP
On
Off
Set to
On
to monitor the projector using
SNMP. To monitor the projector, you
need to install the SNMP manager
program on your computer. SNMP
should be managed by a network
administrator.
