Epson EB-L1050U, Руководство пользователя

Страница: 23 / 291

Operation Set
Displaying frequently used Configuration
menu items. Press the [User1], [User2], or [User3]
button. You can set the menu item you want
to assign to each button in
User Button .
s
Settings - User Button p.143
The following items can be assigned.
Light Source Mode , Multi-Projection ,
Resolution , On-Screen Display , Display
the QR Code , Image Enhancement , Frame
Interpolation , Link Menu , Content
Playback , USB
When you press the button for which On-
Screen Display is assigned, menus or
messages are not displayed on the screen.
When the same button is pressed, they are
displayed again. If
On-Screen Display is
enabled, you cannot operate the
Configuration menu (except to switch the
color mode and input source).
Replacing the remote control batteries
If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. When this happens, replace them with new
batteries. Have two AA size alkaline or manganese batteries ready. You
cannot use other batteries except for the AA size alkaline or manganese.
Attention
Make sure you read the following manual before handling the batteries.
s
Safety Instructions
a
Remove the battery cover.
While pushing the battery compartment cover catch, lift the cover
up.
b
Replace the old batteries with new batteries.
Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the batteries are inserted the correct way.
If the batteries are not used correctly, they could explode or leak causing
a fire, injury, or damage to the product.
Part Names and Functions
23