Epson EB-L1050U Скачать руководство пользователя страница 20

Страница: 20 / 291

Remote Control

Name

Function

[

] button

Turns the projector on.

[

] button

Turns the projector off.

Change input buttons

Changes to images from each input port.

"Switching to the Target Image by Remote Control"

p.62

The [SDI] button is unavailable.

[Aspect] button

Each time the button is pressed, the aspect mode changes.

"Changing the Aspect Ratio of the Projected Image"

p.80

[Auto] button

If pressed while projecting analog RGB signals from the
Computer port or the BNC port, you can automatically
optimize Tracking, Sync., and Position.

[Freeze] button

Images are paused or unpaused.

"Freezing the Image (Freeze)"

p.103

[Test Pattern] button

Displays a test pattern.

"Displaying the Test Pattern"

p.33

[Lens Shift] button

Press to adjust the lens shift.

"Adjusting the Position of the Projected Image (Lens

Shift Adjustment)"

p.34

If pressed for more than three seconds, the lens position
moves to the home position.

[Zoom] button

Press to adjust the zoom.

"Adjusting the Image Size"

p.37

[Menu] button

Displays and closes the Configuration menu.

"Configuration Menu Operations"

p.136

Part Names and Functions

Содержание EB-L1050U




































































































































































































































































































Результаты поиска

Содержание EB-L1050U

Отзывы:

Epson EB-L1050U, Руководство пользователя, Страница: 20 / 291

Результаты поиска

Содержание EB-L1050U

Отзывы: