Epson EB-L1050U Скачать руководство пользователя страница 164 | Manualshive

Страница: 164 / 291

Epson EB-L1050U Скачать руководство пользователя страница 164

Once  the  Configuration  menu  content  has  been  set  for  one  projector,  you
can  use  it  to  perform  batch  setup  for  multiple  projectors  (batch  setup
function).  The  batch  setup  function  is  only  for  projectors  with  the  same
model  number.

Use one of the following methods.

•

Setup using a USB flash drive.

•

Setup by connecting the computer and projector with a USB cable.

•

Set through Epson Projector Management.

This manual explains the USB flash drive and the USB cable methods.

a

•

The content for Light Source Info and Status Information from the
Info menu is not reflected by the batch setup function.

•

Perform  batch  setup  before  adjusting  the  projected  image.
Adjustment  values  for  the  projected  image,  such  as  Geometry
Correction  are  reflected  by  the  batch  setup  function.  If  batch  setup  is
performed  after  adjusting  the  projected  image,  the  adjustments  you
made  may  change.

•

By  using  the  batch  setup  function,  the  registered  User's  Logo  is  set
for  the  other  projectors.  Do  not  register  confidential  information  and
so  on  as  the  User's  Logo.

•

If you do not want to copy the following settings, set

Batch Setup

Range

to

Limited

.

-

EDID

from the

Signal

menu

-

Network

menu (except for the

Notifications

menu and the

Others

menu)

s

Extended

-

Operation

-

Advanced

-

Batch Setup

Range

•

Items for which Password Protection is set are not copied.

Caution

Performing  batch  setup  is  the  customers  responsibility.  If  batch  setup  fails  due
to  a  power  failure,  communication  error,  and  so  on,  the  customer  is  responsible
for  any  repair  costs  incurred.

Batch Setup

164

«
...
162
163
164
165
166
...
»

Содержание EB-L1050U




































































































































































































































































































Отзывы:

Нет отзывов