a
•
When A/V Mute is enabled, the light source turns off.
•
If you want to fade out or fade in when turning the video on or off,
set the desired number of seconds in
Fade-out
and
Fade-in
.
s
Extended
-
Operation
-
A/V Mute Settings
-
Fade-out
,
Fade-in
•
When A/V mute is activated and no operations are performed for
about 2 hours, the projector turns off automatically. If you do not
want to turn off the power, set
A/V Mute Timer
to
Off
.
s
Extended
-
Operation
-
A/V Mute Settings
-
A/V Mute Timer
•
When
A/V Mute Release
is set to
A/V Mute
from the configuration
menu, the following operations can still be performed without
releasing A/V mute.
- Change the source with the change input buttons on the remote
control.
- Control the projector from a computer using communication
commands.
s
Extended
-
Operation
-
A/V Mute Settings
-
A/V Mute Release
A/V mute is only released by pressing the [A/V Mute] button, or by
sending an A/V mute Off command.
•
When projecting moving images, the images and sound continue to
be played back while A/V Mute is on. It is not possible to resume
projection from the point where A/V Mute was activated.
Freezing the Image (Freeze)
When Freeze is activated on moving images, the frozen image continues to
project on the screen, so you can project a moving image one frame at a
time like a still photo. Also, you can perform operations such as changing
between files during presentations from a computer without projecting any
images if the Freeze function is activated beforehand.
Each time you press the [Freeze] button, Freeze turns on or off.
Remote control
a
•
Audio does not stop.
•
When projecting moving images, the images continue to be played
back while the screen is frozen. It is not possible to resume
projection from the point where the screen was frozen.
•
If the [Freeze] button is pressed while the Configuration menu or
the Help screen is displayed, the menu or the Help screen that is
displayed is closed.
•
Freeze still works while E-Zoom is being used.
Projection Functions
103
Содержание EB-L1050U
