Epson EB-G5450WU Скачать руководство пользователя страница 31

Страница: 31 / 171

The

Split Screen Setup

will also be displayed when the [Source

Search] button is pressed on the remote control or control panel or
when a Source button is pressed on the remote control.

To  switch  the  image  projected  on  the  left  screen,  select  "Source
Left"  and  press  the  [Enter]  button.  To  switch  the  image
projected  on  right  screen,  select  "Source  Right"  and  press  the
[Enter]  button.

Select the input source to project and press the [Enter] button.

Only the input sources that can be combined can be selected.

"Input Sources for Split Screen Projection"

p.30

To switch the projected image during split screen projection, start the
procedure from step 2.

•

The audio from the input source that is selected for the left screen
will be output.

•

Computer1

BNC

is selected for the left screen, the image for

the left screen can be displayed on an external monitor. (This is
possible only when analog RGB signals are input.)

p.131

Switching the left and right screens

Use the following procedure to switch the images displayed on the left and
right screens.

Procedure

Press the [Menu] button on the remote control or the control
panel during split screen projection.

Select "Swap Screens" and then press the [Enter] button.

The images on the left and right screens will be swapped.

Switching the left and right image sizes

Procedure

Press the [Menu] button on the remote control or the control
panel during split screen projection.

Select "Screen Size" and then press the [Enter] button.

Select the image size to display and then press the [Enter]
button.

Press the [Menu] button to end the setting procedure.

Projecting Two Images Simultaneously (Split Screen)

Содержание EB-G5450WU












































































































































































Результаты поиска

Содержание EB-G5450WU

Отзывы:

Epson EB-G5450WU, Руководство пользователя, Страница: 31 / 171

Результаты поиска

Содержание EB-G5450WU

Отзывы: