manualshive.com logo in svg

Epson EB-E01, Руководство по обслуживанию, Страница: 159 / 190

Поделиться
Скачать
Epson EB-E01 Скачать руководство пользователя страница 159

EB-E01 series

Disassembly and Assembly

INTERNAL USE ONLY

SEIKO EPSON

159

Revision A

2. Backing up the DR data

2-1.

Start up the CAT.

2-2.

Select [SETUP]-[SELECT MODEL], and choose the group 
matched with the model group list.

2-3.

Run "BACKUP".

BACKUP: SUCCEEDED

Go to "REPLACING THE MA BOARD".

BACKUP: FAILED

Obtaining the DR data

1. Obtaining the DR data

Obtain the corresponding DR data referring to the Technical Information 
AP08-0912E.

2. Saving the data to the PC

Save the DR data file to the following folder in the PC.

C:\IRIS\DRDATA\

REPLACING THE MA BOARD

1. Replacing it with a good MA Board

Prepare a good MA Board belonging to the same model group, and replace 
the boards.

2. Turning on the projector and Connecting to the PC

Connecting using RS-232C cable

1. Press the [Power] button on the projector or the remote controller to 

turn on the projector.

2. Connect the projector to the PC using RS-232C cable.

Connecting using USB cable

1. Disconnect the power cord from the projector and check that all of the 

indicators on the projector are off.

2. Connect the power cord to the projector while pressing the [Enter] 

button on the Control Panel or remote controller. When the LED panel 
on the projector flashes four times and then lights up, release the 
[Enter] button.

3. Connect the projector to the PC using USB cable.

4. Press the [Power] button on the projector or the remote controller.

Even if the model number; Hxxx that indicated on a label 
attached to the MA board, is not matching to the model 
number indicated on the serial number label of the optical 
engine, you can still execute BACKUP operation by 
selecting the "group" in the Model Group List for 
[SELECT MODEL] menu.

RESTORE cannot operate correctly if the DR data is 
not saved in the specified folder. (RESTORE will not 
operate correctly if the file cannot be checked.)

Do not change the name of the DR data file.

See "User's Guide" for the method to configure serial 
communication.

Содержание EB-E01































































































































































































Отзывы:

Нет отзывов