Epson EB-940H, Руководство пользователя

Страница: 48 / 181

Correcting automatically
Auto V-Keystone
When the projector detects any movement, for example when it is installed,
moved, or tilted, it automatically corrects vertical keystone distortion. This
function is called Auto V-Keystone.
When the projector remains still for about two seconds after it detects
movement, it displays a screen for adjustment and then automatically
corrects the projected image.
You can use Auto V-Keystone to correct the projected image under the
following conditions.
Correction angle: approx. 30˚ up and down
a
•
Auto V-Keystone works only when Projection is set to Front from
the Configuration menu.
s
Extended - Projection p.106
•
If you do not want to enable Auto V-Keystone, set Auto V-
Keystone to Off .
s
Settings - Keystone - H/V-Keystone - Auto V-Keystone
p.105
Correcting manually
You can manually correct keystone distortion.
You can use H/V-Keystone to correct the projected image under the
following conditions.
Correction angle: approx. 30˚ right and left/approx. 30˚ up and down
H-Keystone Adjuster
Move the horizontal keystone adjuster to the right or left to perform
horizontal keystone correction.
EB-S29/EB-S27
EB-955WH/EB-950WH
/EB-965H/EB-945H/EB-940H
/EB-98H/EB-97H/EB-W29
/EB-X30/EB-X29/EB-X27
a
•
When using horizontal keystone adjuster, set H-Keystone Adjuster
to On .
s
Settings - Keystone - H/V-Keystone - H-Keystone Adjuster
p.105
•
You can also correct keystone distortion in the horizontal direction
using H/V-Keystone.
Adjusting Projected Images
48