Sub Menu
Function
Operation
Direct Power On
: You can set whether or not (
On
/
Off
) to enable Direct Power On.
When it is set to
On
and the power cable is plugged in, be aware that the projector turns on automatically in cases such as a power outage
is restored.
Sleep Mode
: When set to
On
, this automatically stops projection when no image signal is being input and no operations are carried
out.
Sleep Mode Timer
: When Sleep Mode is set to
On
, you can set the time before the projector automatically turns off within a range of 1 to
30 minutes.
Lens Cover Timer
: When set to
On
, this turns off the power automatically 30 minutes after the A/V mute slide is closed. Lens Cover Timer
is set to
On
at the time of purchase.
High Altitude Mode
: Set to
On
when using the projector above an altitude of 1500 m.
Standby Mode
You can use the following functions even when the projector is in standby mode if this is set to
Communication On
.
•
Monitor and control the status of the projector via the network.
•
The Mic Input function outputs audio from the projector's speaker when a mic is connected to the Microphone (Mic) Input Port.
•
Function to output to an external monitor connected to the Monitor Output (Monitor Out) port the image signal from the computer
connected to the Computer1 input port.
Mic input is also enabled if this setting is set to Communication On and Standby Microphone is set to
On
.
You can use SNMP
or Web Control to monitor and control the status of the projector over the network, or by using the "EasyMP
Monitor" software supplied with this product. (EB-826WH/825H/85H/84H/84L only)
Standby Microphone
(Only possible when the Standby Mode mentioned above is set to Communication On)
When Standby Mode is set to Communication On, set whether mic Input is enabled (
On
) or disabled (
Off
).
*
2
Plug-in Power
Set this to
On
when using a mic supported by Plug-in Power.
USB Type B
Set to USB Display when the projector and a computer are connected by a USB cable and computer images are projected.
s
Quick Start
Guide
Set to
Wireless Mouse
when the mouse pointer is to be operated by the Remote Control.
s
Language
You can set the Language for message displays.
Reset
You can reset
Display
*
1
and
Operation
*
3
from the
Extended
menu to their default settings.
To return all menu items to their default settings, see
s
*
1 When User's Logo Protect is set to On in Password Protect, settings relating to User's Logo cannot be changed. You can make changes after setting User's Logo Protect to
Off.
s
*
2 If
Power On Protect
in
Password Protect
is
On
, mic input is not possible even when Standby Microphone is set to
On
.
*
3 Except for "High Altitude Mode".
List of Functions
64
Содержание EB-824H
