Epson EB-824H, Руководство пользователя, Страница: 17 / 136

q
The following screen showing the status of image signals is displayed
when only the image that the projector is currently displaying is
available, or when no image signal can be found. You can select the
input port where the equipment you want to use is connected. If no
operation is performed after about 10 seconds, the screen closes.
USB is only displayed for EB-826WH/825H/824H/85H.
LAN is only displayed for EB-826WH/825H/85H.
Switch to Target Image by Remote Control
You can change directly to the target image by pressing the following
buttons on the Remote Control.
Remote Control
A
Each time the button is pressed, the image changes between the Computer1
and the Computer2 input port.
B
Each time the button is pressed, the image changes between the Video and
the S-Video input port.
C
Each time the button is pressed, it changes to the image from equipment
connected to USB Display/USB (TypeA) Port. Only changes to USB Display
when using the EB-84.
D
Changes to the image projected with EasyMP Network Projection. When
projecting via Quick Wireless Connection using the optional Quick
Wireless Connection USB Key, this button switches to that image.
(EB-826WH/825H/85H only)
When using EB-824H/84H/84L, this does not function even if the button is
pressed.
Changing the Projected Image
17