Epson EB 824, Руководство пользователя

Страница: 89 / 121

When the Mail Notification function is set to On and a problem/
warning occurs in the projector, the following e-mail will be sent.
Subject: EPSON Projector
Line 1: The Projector Name where the problem has occurred
Line 2: The IP Address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The following table
shows the details that are given in the message for each item. To deal
with problems/warnings, see
"Reading the Indicators" .
s
p.55
Message Cause
Internal error
Internal Error
Fan related error
Fan Error
Sensor error
Sensor Error
Lamp cover is open.
Lamp Cover Open
Lamp timer failure
Lamp Failure
Lamp out
Lamp Error
Internal temperature error
High Temp Error
(Overheating)
High-speed cooling in progress
High Temp Warning
Lamp replacement notification
Replace Lamp
No-signal
No Signal
No Signal is input to the projector.
Check the connection status or check
that the power for the signal source is
turned on.
Auto Iris Error
Auto Iris Error
Message Cause
Power Err. (Ballast)
Power Err. (Ballast)
A (+) or (-) appears at the start of the message.
(+): A projector problem has occurred
(-): A projector problem has been dealt with
Reading Problem Mail Notification Function (EB-826W/825/85/84 only)
89