Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image
signal and Source currently being projected as shown in the following screen shots. Depending on the model used, some input sources are not
supported.
s
Computer Signal/Component Video
/USB /USB
Display
Composite video
/S-Video
LAN
Sub Menu
Function
Lamp Hours
You can display the cumulative Lamp operating time
*
.
When it reaches the lamp warning time, the characters are displayed in yellow.
Source
You can display the Source name for the connected equipment currently being projected.
Input Signal
You can display the content of
Input Signal
set in the
Signal
menu according to the
Source
.
Resolution
You can display the Resolution.
Video Signal
You can display the content of
Video Signal
set in the
Signal
menu.
Refresh Rate
You can display the Refresh Rate.
Sync Info
You can display the image signal Info.
This information may be needed if service is required.
Status
This is Info about errors that have occurred on the projector.
This information may be needed if service is required.
Serial Number
Displays the projector's serial number.
*
The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H", "11H", and so on.
List of Functions
51
Содержание EB 824
