Epson EB-470, Руководство пользователя

Страница: 106 / 165

Sub-menu Function
Net. Info. - Wire‐
less LAN
Displays the following network setting status information.
•
Connection Mode
•
Antenna Level
•
Projector Name
•
SSID
•
DHCP
•
IP Address
•
Subnet Mask
•
Gateway Address
•
MAC Address
•
Region Code
*
Net. Info. -
Wired LAN Displays the following network setting status information.
•
Projector Name
•
DHCP
•
IP Address
•
Subnet Mask
•
Gateway Address
•
MAC Address
Network Config‐
uration The following menus are available for setting network items.
Basic , Wireless LAN , Security , Wired LAN , Mail , Others ,
Reset , and Setup complete
* Displays available region information for the Wireless LAN unit being used.
For more details, contact your local dealer or the nearest address provided in
the Epson Projector Contact List.
s
Epson Projector Contact List
a
By using a Web browser of a computer connected to the projector on
a network, you can set functions and control the projector. This
function is called Web Control. You can easily enter text using a
keyboard to make settings for Web Control such as Security settings.
s
"Changing Settings Using a Web Browser (Web Control)" p.84
Notes on operating the Network menu
Selecting from the top menu and sub menus, and changing selected items is
the same as making operations from the Configuration menu.
When done, make sure you go to the Setup complete menu, and select one
of Yes , No , or Cancel . When you select Yes or No , you return to the
Configuration menu.
Yes : Saves the settings and exits the Network menu.
No : Does not save the settings and exits the Network menu.
Cancel : Continues displaying the Network menu.
Soft keyboard operations
The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed. Use
the [ ], [ ], [ ], and[ ] buttons on the remote control or
the [
w
], [
v
], [Wide], and [Tele] buttons on the control panel to move the
cursor to the key you want, and then press the [ ] button to enter the
alphanumerical character. Enter figures by holding down the [Num] button
on the remote control, and pressing the numeric buttons. After inputting,
press
Finish on the keyboard to confirm your input. Press Cancel on the
keyboard to cancel your input.
List of Functions
106