Epson EB-420 guide, Руководство пользователя

Страница: 11 / 134

Name Function
C
Rear feet
When setup on a surface such as a desk, turn to extend and
retract to adjust the horizontal tilt.
s
"Adjusting the Horizontal Tilt" p.37
D
Security cable
installation point Pass a commercially available wire lock through here and
lock it in place.
s
"Installing the wire lock" p.55
E
Front adjustable foot
When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
s
"Adjusting the Image Position" p.37
Control Panel
Name Function
A
[
t
] button
Turns the projector power on or off.
s
"From Installation to Projection" p.28
B
[Source Search]
button Switches to the image from the input port where video
signals are being input.
s
"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.29
C
[ ] button
•
When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
•
If pressed while projecting analog RGB signals from
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Position.
Part Names and Functions
11