Epson EB-1750 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 149

Epson EB-1750 Скачать руководство пользователя страница 31

Automatically Adjust to Fit the Screen Frame -
Screen Fit - (EB-1775W only)

Screen  Fit  is  a  function  that  corrects  the  projected  image  so  that  it  aligns
with  the  frame  (outer  border)  of  the   screen,   white   board,   and   so   on.   By
pressing  the  [Screen  Fit]  button  on  the  remote  control  or  the  control  panel,
the  projected  image  is  adjusted  to  fit   the   screen,   and   keystone   correction
and  focus  adjustments  are  performed  automatically.

The following conditions are necessary to correct the projected image using
Screen Fit.

Screen size: less than or equal to 100"

Distance between projector and screen: approx. 1.0 to 2.5 m

Correction angle: approx 20˚ right and left/approx. 30˚ up and down

a

•

If you exceed the above mentioned range, the projected image
cannot be corrected properly. Correct the projected image manually.

•

Screen Fit does not function if the projector is suspended from a
ceiling. Correct the projected image manually.

a

Press the [Screen Fit] button on the remote control or the control
panel during projection.

Using the remote control

Using the control panel

Adjusting Projected Images

31

«
...
29
30
31
32
33
...
»

Содержание EB-1750






















































































































































Отзывы:

Нет отзывов