Epson EB-1725, Руководство по эксплуатации

Страница: 13 / 108

13
Overview of EMP NS Connection
There are two methods of connecting the projector and a computer via
a network by using EMP NS Connection.
Two Connection Modes and their Main Functions
f
"Quick Connection Mode" (only when the "Wireless LAN
unit" is installed)
"Quick Connection Mode" only runs when you install the supplied
"Wireless LAN unit" in the projector.
"Quick connection mode" temporarily assigns the projector's SSID to a
computer creating an ad hoc
g
connection, and after disconnecting restores
the computer's network settings.
s
p.16
• You can easily connect to a computer and project images from the
computer without making network settings.
• This lets you connect easily without a connector cable, and you can
connect even if the projector and the computer are at remote locations.
f
"Advanced Connection Mode"
"Advanced Connection Mode" is an infrastructure connection, and
connects to an existing network system via a network cable.
If you install the supplied "Wireless LAN unit" in the projector, you can
connect to the network via a wireless LAN access point. If you install the
optional "Ethernet unit" you can connect to a network without an access
point. When connecting to a network via the Ethernet unit, connect the
projector to the network hub with a commercially available LAN cable.
• From a conference room, you can open and project a file stored on a
computer or file server in another room.
• You can use the Internet.
• You can monitor and control projector's on a network from the
computer.
Supplied Wireless LAN unit
Wi-Fi compliant wireless
LAN card or wireless LAN
enabled computer
Internet
LAN