Epson EasyMP Network Projection, Руководство по эксплуатации, Страница: 69 / 109

• Set DHCP to Off .
Go to Network > Network Configuration > Wireless LAN > DHCP or Network > Network
Configuration > Wireless LAN > IP Settings > DHCP .
• Set Wireless LAN Power to On .
Go to Network > Network Configuration > Wireless LAN > Wireless LAN Power .
• When you enable the security setting, set the same passphrase to the computer and the projector.
• Close network settings on the projector, and then return to the LAN standby screen.
• Check the computer's network settings.
• If the wireless LAN adapter is not installed on your computer, install a wireless LAN card on your
computer.
• Enable the wireless LAN setting or AirPort on your computer.
• Check the software settings.
• If another user has established a connection and the projected image remains as it is, you can
connect by interrupting the current connection.
If a Projector Keyword is set for the projector but you do not know the keyword, restart the projector
and check the keyword displayed on the LAN standby screen.
• If you cannot select or change the connection mode, select Display Connection Mode Selection
window on startup on the General settings tab from Set options . The select connection mode
screen is displayed after restarting the software.
Parent topic: Solving Network Connection Problems
Related references
Set options - General settings
Related tasks
Changing the Computer Projection Source
Solutions When You Cannot Connect Using Advanced Connection Mode (Wireless)
When you cannot connect the computer and the projector using Advanced Connection Mode over a
wireless network, try the following solutions.
• Check the status of the external devices used for the network connection or the projector's setting
environment.
• Connect the specified wireless LAN unit to the projector securely.
69