Specifications of Originals and Placing
Originals
Specifications of Originals for Scanning from the ADF
This section explains the specifications and conditions of originals that can be loaded in the ADF.
General Specifications for Originals being Scanned
Type of Original
Thickness
Size
Plain paper
Fine paper
Recycled paper
Post card
Business card
Envelopes
51.8 to 128 g/m2
50.8×70 mm to 100×148
mm (2×2.8 in. to 3.9×5.8 in.):
51.8 to 230 g/m2
Maximum: 215.9×1,117.6 mm (8.5×44 in.)
Minimum: 50.8×70 mm (2.0×2.8 in.)
The loadable size varies depending on the type of originals.
Note:
❏
All originals must be flat at the leading edge.
❏
Make sure that curls on the leading edge of the originals are kept within the following range.
A
and
B
must be 2 mm or less when
C
is equal to or more than 30 mm.
Specifications of Standard Size Originals
These are the specifications for standard size originals that you can load into the ADF.
User's Guide
Specifications of Originals and Placing Originals
24
Содержание DS-310
Страница 1: ...User s Guide NPD5554 03 EN ...