manualshive.com logo in svg

Epson Disc Producer PP-100AP, Руководство пользователя, Страница: 23 / 112

Поделиться
Скачать
Epson Disc Producer PP-100AP Скачать руководство пользователя страница 23

Publishing Discs

23

Chapter 2 

Publishing Discs

Introduction

This section guides you through the procedures for printing disc labels.

Note:

For information on discs, see the following section.

&

 See “Discs” on page 106.

Turning Power On/off

This section describes how to turn on/off power.

Turning power on

1. Connect the power cable.

2. Press 

P

Power

 button until the power light flashes.

Power light flashes in green, then stays on.

Turning power off

Press the 

P

Power

 button. The 

Power light will flash in green then turn off; then 

power is turned off.

c

Caution:

❏

Fan will operate after turning power off, but it will automatically stop after 15 minutes.

❏

If the product is operating, wait for 10 seconds after operation is stopped, then turn off 
power.

❏

The product may not be recognized by the computer when the power is turned back on 
while fan is operating. In this case, disconnect the USB cable and connect it again.

Overview of Publish Modes

To print labels that you have created/edited is called “Publish” in EPSON Total Disc Maker.

 

The product has three kinds of publish modes.

Содержание Disc Producer PP-100AP

















































































































Отзывы:

Нет отзывов