Installing Screen Fonts
|
5
Installing Screen Fonts
The Fonts installer on the Fiery Spark CD-ROM includes screen and printer
fonts that correspond to the 136 built-in PostScript printer fonts on the Fiery
Spark. The Fonts installer copies both kinds of fonts to the System > Fonts
folder on your hard drive. To be available to applications, the screen fonts must
remain in this folder. The printer fonts can be copied to a folder of your choice.
If you have any applications open, you must quit and relaunch them before the
newly installed screen fonts are available.
Follow these steps:
1. On the Fiery Spark CD-ROM, open the
Software
folder.
2. Double-click the
Fonts
icon.
3. At the next screen, click
Install
.
4. Click
Restart
when installation is complete.
Installing ColorSync Profiles
You can install ICC profiles for use with ColorWise
®
Pro Tools and
applications that support ICM standards. Follow these steps:
1. On the Fiery Spark CD-ROM, open the
Software
>
ColorSync
folder.
2. Copy the
file to the
System
Folder
>
ColorSync Profiles
folder.
3. Set the ColorSync system profile in the Control Panel.
Selecting TCP/IP
You must select TCI/IP from the Control Panel in the Apple
®
menu. In the
TCP/IP window, select
Connect via Ethernet
. Then restart your Macintosh.
designer.book Page 5 Wednesday, August 22, 2001 2:03 PM
