Quiet Mode:
Select
On
to reduce noise during printing, however, this may lower the print speed. Depending on
the paper type and print quality settings you selected, there may be no difference in the printer's noise
level.
Ink Drying Time:
Select the ink drying time you want to use when performing 2-sided printing. The printer prints the
other side after printing one side. If your printout is smeared, increase the time setting.
Bidirectional:
Select
On
to change the print direction; Prints while the print head moves to the left and to the right.
If vertical or horizontal ruled lines on your printout look blurred or misaligned, disabling this feature
may solve the problem; however, doing so may reduce print speed.
PC Connection via USB:
Select
Enable
to allow a computer to access the printer when connected by USB. When
Disable
is
selected, printing and scanning that is not sent over a network connection is restricted.
Related Information
&
&
“Printing JPEG Files from a Memory Device” on page 85
&
“Printing TIFF Files from a Memory Device” on page 85
Network Settings
Select the menus on the control panel as described below.
Settings
>
General Settings
>
Network Settings
You cannot change settings that have been locked by your administrator.
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from the following and then
follow the instructions on the LCD panel.
❏
Router
❏
Wi-Fi Direct
Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used, Wi-
Fi connections are disabled.
Network Status:
Displays or prints the current network settings.
❏
Wired LAN/Wi-Fi Status
❏
Wi-Fi Direct Status
❏
Email Server Status
User's Guide
Preparing the Printer
51
Содержание C11CG69401
Страница 1: ...User s Guide NPD5896 02 EN ...
