24
Maintaining Your Product
Maintaining Your Product
Follow the instructions in this chapter to check and clean the print head nozzles, check ink
levels, and replace ink cartridges. If you need to align the print head, see the online
User’s Guide
.
Caution:
To keep your product looking like new, don’t place anything on top of the
cover or use it as a writing surface. If you need to clean the cover, use only a soft, non-
abrasive microfiber-type cloth.
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, some of the nozzles in the print head may
be clogged or ink may be running low in one or more of the ink cartridges. Follow the
steps below to check the print head nozzles.
1.
Load letter- or A4-size paper.
2.
Press
F
Setup
.
3.
Press
u
or
d
to select
Maintenance
, then press
OK
.
4.
Make sure
Nozzle Check
is selected, then press
OK
.
5.
Press the
B&W
or
Color
x
Start
button.
6.
Check the nozzle check pattern that prints to see if there are gaps in the lines.
7.
If there are no gaps, the print head is clean. Select
Finish Nozzle Check
and then
press
y
Back
to continue printing.
If there are gaps or the pattern is faint, select
Head Cleaning
to clean the print head
Nozzles are clean
Nozzles need cleaning
