Epson C117001-N - DFX 5000+ B/W Dot-matrix Printer, Руководство пользователя

Страница: 73 / 229

Printing on Special Paper
The DFX-5000 can print on various types of paper, including
multi-part forms and labels. It can also handle a variety of paper
thicknesses, from thin paper to six-part forms. The printer
automatically adjusts to the thickness of your paper.
When you print on multi-part forms and labels, the positioning of
your text on the page can be critical. For more information on
aligning your text, see the sections on adjusting top of form and
printing positions earlier in this chapter. You should also check
both your printer and your software page length settings before
you load labels or forms. See the section on setting page length in
Chapter 3.
If you are using labels or preprinted or multi-part forms, you may
want to use the optional pull tractor. See Chapter 6.
WARNING: When printing on multi-part forms or
labels, be absolutely sure that your printing stays within
the printable area of the paper to prevent damage to the
print head. For more information on the printable area,
see Appendix B.
Using multi-part forms
You can use multi-part forms with up to four sheets, including the
original, on the rear tractor. On the front tractor, you can use
forms with up to six sheets.
You load continuous multi-part forms the same way you load any
other type of continuous paper. Before loading multi-part forms,
however, make sure the paper has a clean straight edge and does
not separate or tear apart. See the sections on loading paper
earlier in this chapter.
2-30 Loading and Using Paper