Epson AP002, Руководство пользователя

Страница: 59 / 142

59
Chapter 6
Measuring Distance and Pace with the Stride Sensor (SS-700/SS-500 Only)
6-1 About the stride sensor
Measuring with the stride sensor
By using the built-in stride sensor, you can measure distance and pace even in
locations that cannot receive GPS signals, such as tunnels or buildings.
Stride sensor measurements are only available for the SS-700/SS-500.
· The stride sensor measures distance and pace using the latest running pitch information
received from the GPS.
If your running pace differs greatly from the latest running pace received from the GPS,
there may be a large difference between the distance and pace measured with the stride
sensor.
· The device's stride sensor is used for running. This is not available for cycling, skiing, or
canoeing. Also, when walking, a large measurement error may occur.
You need to make the following preparations when using this
product for the first time.
To measure distance and pace using the stride sensor, you need to run at least
400 meters first with [Stride] set to [ON] and GPS on.
You can then use the stride sensor. You do not need to make these preparations from
the second time.