Epson AL-MX200 Series Скачать руководство пользователя

Страница: 346 / 410

Jam Problems

Misfeed Jam

Problem

Action

Print media misfeeds occur.

Remove the paper from the Priority Sheet Inserter (PSI), and then ensure that the
paper is properly inserted in the paper tray.

Depending on the print media you use, take any of the following actions:

❏

For thick paper, use the one that is 163 gsm or less.

❏

For postcard, the one up to 190 gsm is available.

❏

For thin paper, use the one that is 60 gsm or more.

❏

For the envelope, ensure that it is properly loaded in the paper tray as
instructed in “Loading Envelopes in the Paper Tray” on page 128.

If the envelope is deformed, correct it or use another envelope.

If performing manual duplex (2-sided) printing, ensure that the print media is not
curled.

Fan the print media.

If the print media is damp, turn over the print media.

If the problem continues, use print media that is not damp.

Note:

If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.

Multi-feed Jam

Problem

Action

Print media multiple feeds occur.

Remove the paper from the Priority Sheet Inserter (PSI), and then ensure that the
paper is properly loaded in the paper tray.

If the print media is damp, use print media that is not damp.

Fan the print media.

A document jam occurs in the ADF if
scanning of multiple-sheet document
is cancelled while scanning is in
progress.

Clear the jam.

AL-MX200 Series User’s Guide

Troubleshooting

346

Содержание AL-MX200 Series



























































































































































































































































































































































































































Результаты поиска

Содержание AL-MX200 Series

Отзывы:

Похожие инструкции для AL-MX200 Series

Бренды по названию

Популярные бренды

Epson AL-MX200 Series, Руководство пользователя

Результаты поиска

Содержание AL-MX200 Series

Отзывы:

Похожие инструкции для AL-MX200 Series

Бренды по названию

Популярные бренды