Option
Description
Ans Select
TEL Mode
The printer does not automatically receive faxes. To receive an
incoming fax, you need to pick up the handset of the connected
external telephone and press the 2-digit remote receive code.
FAX Mode
This option is selected by default and the printer automatically
receives faxes.
TEL/FAX Mode
When the printer receives an incoming fax, the external telephone
rings for the period of time specified for
Auto Ans. TEL/FAX
, and
then the printer automatically receives the fax. If an incoming call is not
a fax, the printer beeps from the internal speaker indicating that the
call is a telephone call.
Ans/FAX Mode
The printer shares the telephone line with an answering machine and
monitors the line for a fax tone. It will pick up an incoming call if it hears
a fax tone. This option is not available in regions where a serial phone
system is employed.
DRPD Mode
To use this option, you need to subscribe the Distinctive Ring Pattern
Detection (DRPD) service from your telephone company that assigns
multiple telephone numbers to a single telephone line and
distinguishes each line with a distinctive ring pattern. Once this service
is activated, then you can configure your printer to monitor the line for
the distinctive ring pattern.
Auto Answer Fax
Specify a period of time for which the printer waits before entering the
FAX Mode upon reception of an incoming call.
Auto Ans. TEL/FAX
Specify a period of time for which the printer waits before entering the
FAX Mode when the external telephone receives an incoming call.
Auto Ans. Ans/FAX
Specify a period of time for which the printer waits before entering the
FAX Mode when the answering machine receives an incoming call.
Line Monitor
Select a volume level of the sound that the printer emits from the
internal speaker while establishing a connection for fax transmission.
Ring Tone Volume
Select a volume level of the ring tone that the printer emits from the
internal speaker to indicate an incoming telephone call while in the
TEL/FAX Mode.
Line Type
Select the line type.
Dialing Type
Select the dialing type.
Note:
DP (10pps)
is not displayed when
South Africa
is set for
Region
.
Interval Timer
Specify an interval between transmission attempts.
AL-MX200 Series User’s Guide
Faxing
259
