manualshive.com logo in svg

Epson AL-MX200 Series, Руководство пользователя

Поделиться
Скачать
Epson AL-MX200 Series Скачать руководство пользователя страница 104

6. Take a note of PIN code displayed on the operator panel.

7. Select 

Start Configuration

, and then press the   button.

8. If SSID selection screen appears, select the SSID, and then press the   button.

9. Enter the PIN code of the printer at the web page of the wireless access point.

10. Wait a few minutes until the printer restarts to establish the wireless network.

11. Print a System Settings page from the operator panel.

See “Printing and Checking the System Settings Page” on page 48.

12. Confirm that "Link Quality" is shown as "Good", "Acceptable" or "Low" on the report.

Note:

When "Link Quality" is "No Reception", check if the wireless settings are correctly configured.

Installing Print Drivers on Computers Running Linux (CUPS)

This section provides information on installing and setting up print drivers with CUPS (Common
UNIX Printing System) on Red Hat Enterprise Linux

®

 6 Desktop (x86), SUSE

®

 Linux Enterprise

Desktop 11 (x86), and Ubuntu 10 (x86). For the information on the previous versions of the Linux
operating systems, visit respective web sites.

Installing Print Drivers

Note:

The print driver 

EPSON-AL_MX200-x.x-y.noarch.rpm

 or 

epson-al_mx200_x.x-y_all.deb

 is

included in the 

linux

 folder on the Software Disc.

For Red Hat Enterprise Linux 6 Desktop (x86)

1. Double-click 

EPSON-AL_MX200-x.x-y.noarch.rpm

 on the Software Disc.

2. Click 

Install

.

3. Enter the administrator's password, and then click 

Authenticate

.

AL-MX200 Series     User’s Guide

Printer Connection and Software Installation     

104

Содержание AL-MX200 Series



























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды