Epson AL-M300 Series, Руководство пользователя

Страница: 84 / 225

Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the
printing position goes beyond the right margin. If you select
Off
, the printer does not print any
characters beyond the right margin and does not perform any line wrapping until it receives a
carriage-return character. This function is handled automatically by most applications.
Auto LF
If you select
Off
, the printer does not send an automatic line-feed (LF) command with each
carriage-return (CR). If
On
is selected, a line-feed command is sent with each carriage-return. Select
On
if your text lines overlap.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select
Dark
,
the bit image density is high, and if you select
Light
, the bit image density is low.
If you select
BarCode
, the printer converts bit images to bar codes by automatically filling in any
vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader.
This mode will reduce the size of the image being printed, and may also cause some distortion when
printing bit image graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
I239X Menu
The I239X mode emulates IBM
®
2390/2391 Plus commands.
These settings are available only when the printer is in the I239X mode.
Item Settings (default in bold)
Font
Courier , Prestige, Gothic, Orator, Script, Presentor, Sans serif
Pitch
10cpi , 12cpi, 15cpi, 17cpi, 20cpi, 24cpi, Prop.
Code Page
437 , 850, 858, 860, 863, 865
T.Margin 0.30 ... 0.40 ...1.50inch in 0.05-inch increments
Text 1 ... 67 ... 81Lines
Auto CR Off , On
AL-M300/AL-M400 Series User's Guide
Using the Control Panel 84